Would You Like To TRIPLE Your Playing Enjoyment?
 
This user-installed T2P Switch gives you 4 pickup tones from your Precision Bass or clone.
 
Uses two mini switches to put both pickup coils in normal phase or reverse phase; as well as put pickup coils in a Parallel or Series circuit. 
 
Customer Feedback
Your upgrade just made this the bass of my dreams.
 
Easy To Install
You rewire the pickups by cutting the wire that connects the two "P" coils and attach extra wire (supplied) using the included solderless terminal connectors. This separates the "P" pickup into two separate pickup coils. Use an ohmmeter to confirm that the wires connected to the pickups read continuity. 
 
Once rewiring is completed; 
You mount the switch and connect your pickup wires to the switch
You connect your volume-tone control to the switch
You start exploring all the pickup tones now available to you. 
 
Picture shows what it looks like installed. Your existing volume-tone control may need to be rewired. 
 
What You Get
One assembled and tested T2P Switch
Parts bag
URL for Instructions you download from our Document Library
 
Tools Needed
You need the following tools. 
Wire cutters / wire strippers; pliers
Phillips & straight slot screwdriver
Ohmmeter to measure continuity
Electric drill; 9/32; 1/2; 1/4; 1/16 drill bits; center puch
Soldering iron (25 watt) with fine tip; rosin core solder
 
Makes your Upgraded PBass Hard to put down. GUARANTEED!